產品內容介紹
ACCU-SORT AV6010電源模塊
過勵磁保護OEXPVPH當電力變壓器或發電機的疊片鐵芯受到的磁通密度超過其設計極限時，雜散磁通將流入非疊片元件，而非設計用于攜帶磁通并導致渦流流動。渦流會在相對較短的時間內導致過熱，嚴重?fù)p壞絕緣和相鄰部件。該功能具有可設置的反向操作曲線和獨立的報警階段。電壓差動保護VDCPTOV A電壓差動監測功能可用。它比較兩組三相電壓互感器的電壓，并具有一個靈敏報警步驟和一個跳閘步驟?；谌沃C波STEFPHIZ的95%和100%定子接地故障保護定子接地是一種故障率較高的故障類型。發電機系統通常具有高阻抗接地，即通過中性點電阻器接地。該電阻器的尺寸通?？稍诎l(fā)電機高壓端子直接發生固體接地故障時，提供3–15 A范圍內的接地故障電流。與兩相導體之間的短路情況相比，相對較小的接地故障電流對發電機產生的熱應力和機械應力要小得多。無論如何，必須檢測發電機中的接地故障，并且必須跳閘發電機，即使與內部短路相比，允許更長的故障時間。在發電機組的正常非故障運行中，中性點電壓接近零，發電機中沒有零序電流。當發生相間接地故障時，中性點電壓將升高，并有電流流過中性點電阻器。
頻率保護
為了檢測發電機組繞組上的接地故障，可以使用中性點過電壓保護、中性點過電流保護、零序過電壓保護或剩余差動保護。這些保護措施很簡單，多年來效果很好。然而，這些簡單的方案最多只能保護95%的定子繞組。它們?cè)诳拷行远说牡胤搅粝?%的未受保護。在不利條件下，盲區可從中性點延伸至20%。95%定子接地故障保護測量發電機星點中的基頻電壓分量，超過預設值時運行。通過應用這一原理，大約95%的定子繞組可以得到保護。為了保護靠近中性端的最后5%定子繞組，可以進行三次諧波電壓測量。在100%定子E/F三次諧波保護中，可以應用三次諧波電壓差動原理、中性點三次諧波欠壓原理或終端側三次諧波過電壓原理。然而，強烈建議使用微分原理。這兩種測量原理的結合為整個定子繞組的接地故障提供了覆蓋范圍。欠頻保護SAPTUF由于網絡發電不足而發生欠頻。欠頻保護SAPTUF用于甩負荷系統、補救措施方案、燃?xì)廨啓C(jī)啟動等。該操作基于正序電壓測量，需要連接兩相或三相中性點電壓。有關如何連接模擬輸入的信息，請參閱應用手冊/IED應用/模擬輸入/設置指南
Overexcitation protection OEXPVPH
When the laminated core of a power transformer or generator is subjected to a magnetic flux density beyond its design limits, stray flux will flow into non-laminated components not designed to carry flux and cause eddy currents to flow. The eddy currents can cause excessive heating and severe damage to insulation and adjacent parts in a relatively short time. The function has settable inverse operating curves and independent alarm stages.Voltage differential protection VDCPTOV A voltage differential monitoring function is available. It compares the voltages from two three phase sets of voltage transformers and has one sensitive alarm step and one trip step. 95% and 100% Stator earth fault protection based on 3rd harmonic STEFPHIZ Stator earth fault is a fault type having relatively high fault rate. The generator systems normally have high impedance earthing, that is, earthing via a neutral point resistor. This resistor is normally dimensioned to give an earth fault current in the range 3 – 15 A at a solid earth-fault directly at the generator high voltage terminal. The relatively small earth fault currents give much less thermal and mechanical stress on the generator, compared to the short circuit case, which is between conductors of two phases. Anyhow, the earth faults in the generator have to be detected and the generator has to be tripped, even if longer fault time compared to internal short circuits, can be allowed.In normal non-faulted operation of the generating unit the neutral point voltage is close to zero, and there is no zero sequence current flow in the generator. When a phase-toearth fault occurs the neutral point voltage will increase and there will be a current flow through the neutral point resistor.
Frequency protection
To detect an earth fault on the windings of a generating unit one may use a neutral point overvoltage protection, a neutral point overcurrent protection, a zero sequence overvoltage protection or a residual differential protection. These protections are simple and have served well during many years. However, at best these simple schemes protect only 95% of the stator winding. They leave 5% close to the neutral end unprotected. Under unfavorable conditions the blind zone may extend up to 20% from the neutral. The 95% stator earth fault protection measures the fundamental frequency voltage component in the generator star point and it operates when it exceeds the preset value. By applying this principle approximately 95% of the stator winding can be protected. In order to protect the last 5% of the stator winding close to the neutral end the 3rd harmonic voltage measurement can be performed. In 100% Stator E/F 3rd harmonic protection either the 3rd harmonic voltage differential principle, the neutral point 3rd harmonic undervoltage principle or the terminal side 3rd harmonic overvoltage principle can be applied. However, differential principle is strongly recommended. Combination of these two measuring principles provides coverage for entire stator winding against earth faults.Underfrequency protection SAPTUF Underfrequency occurs as a result of a lack of generation in the network. Underfrequency protection SAPTUF is used for load shedding systems, remedial action schemes, gas turbine startup and so on. SAPTUF is also provided with undervoltage blocking. The operation is based on positive sequence voltage measurement and requires two phase-phase or three phaseneutral voltages to be connected. For information about how to connect analog inputs, refer to Application manual/IED application/Analog inputs/Setting guidelines
產品優勢
1：國外專業的供貨渠道，具有價格優勢
2：產品質量保證，讓您售后無憂
3：全國快遞包郵
4：一對一服務
公司主營范圍簡介
PLC可編程控制器模塊，DCS卡件，ESD系統卡件，振動監測系統卡件，汽輪機控制系統模塊，燃?xì)獍l(fā)電機備件等，優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件、歐美進口模塊。
產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等
