Vibro-meter 620-002-000-113 620-003-111-112 VM600 XIO16T
如果使用設備庫的對象類型，則它們已經具有適用于LD 800P、SK2和SK3的定時參數。（2） 如果非循環DP-V1通信有高流量，則增加時隙時間。（3） 如果一個PA設備的輸入和輸出數據總數超過253字節，則使用此值。如有必要，可縮短LD 800P、SK2和SK3的看門狗時間。準確值可根據I/O數據長度、PA設備數量、PA段長度等進行計算。有關更多信息，請參閱LD 800P、SK2和SK3的用戶說明。插入從屬單元要添加新的PROFIBUS DP從屬單元，請按照說明進行操作。1.右鍵單擊要插入從屬單元的CI854，然后選擇插入單元。彈出Insert Unit（插入單元）對話框。在Connected Libraries（連接的庫）下展開從屬設備的庫，并選擇從屬硬件類型，如S800示例中所示的CI840。在顯示的對話框中為硬件單元選擇一個位置，即PROFIBUS從屬地址。默認情況下選擇第一個可用位置。如果需要其他位置，請單擊列表框以顯示可用位置并選擇所需位置。
If object types of the Device Library are
used, they already have the timing parameters adapted for LD 800P, SK2 and SK3.
(2) Increase the slot time if there is high traffic for acyclic DP-V1 communication.
(3) Use this value if the total of input and output data for one PA device exceeds 253 bytes.
If necessary the watchdog time for LD 800P, SK2, and SK3 can be decreased.
The exact value can be calculated based on the I/O data length, the number of PAdevices, length of PA-segments etc. For more information refer to the User
Instructions for LD 800P, SK2, and SK3.Insert a Slave Unit
To add a new PROFIBUS DP slave unit proceed as described.
1. Right-click on the CI854 you want to insert the slave unit and select
Insert Unit. The Insert Unit dialog pops up.Expand the library for the slave device under Connected Libraries and select
the slave hardware type like CI840 as shown in the example for S800. Select a
position, the PROFIBUS slave address, for the hardware unit in the dialog box
displayed. The first available position is chosen by default. If another position
is desired, click the list box to display available positions and select the desired
one.
