GESPAC GESMDC-1電路板
GESPAC GESMDC-1完成或修改機構要完成機構的建模，請執行以下步驟：1。如果“關節映射”組中的值正確，請單擊“設置”。2.配置姿勢網格。要添加姿勢，請單擊“添加”，然后完成“創建姿勢”對話框。單擊“應用”，然后單擊“確定”。若要添加姿勢，請單擊“添加”，然后完成“創建姿勢”對話框。單擊“應用”，然后單擊“確定”。要編輯姿勢，請?jiān)诰W(wǎng)格中選擇它，單擊“編輯”，然后完成“修改姿勢”對話框。單擊“確定”。若要?jiǎng)h除姿勢，請?jiān)诰W(wǎng)格中選擇該姿勢，然后單擊“刪除”。3.單擊“編輯過渡時間”以編輯過渡時間。4.單擊關閉機構模型名稱指定機構的模型名稱。機制類型指定機制類型。樹結構樹結構中機制的組件。除非該機制是可編輯的，否則樹結構將不可見。每個節點（鏈接、關節、框架、校準和相關性）都可以在其自己的對話框中編輯，如下所示。編譯機制單擊此按鈕編譯機制。除非機構可編輯且機構模型名稱有效，否則此按鈕將不可見。GESPAC GESMDC-1
GESPAC GESMDC-1電路板
Completing or modifying a mechanism To complete the modeling of a mechanism, follow these steps: 1. If the values in the Joint Mapping group are correct, click Set. 2. Configure the Poses grid. To add a pose, click Add and then complete the Create Pose dialog box. Click Apply, followed by OK. To add a pose, click Add and then complete the Create Pose dialog box. Click Apply, followed by OK. To edit a pose, select it in the grid, click Edit, and then complete the Modify Pose dialog box. Click OK. To remove a pose, select it in the grid and then click Remove. 3. Click Edit Transition Times to edit transition times. 4. Click Close Mechanism Model Name Specifies the model name of the mechanism. Mechanism Type Specifies the mechanism type. Tree structure The components of the mechanism in a tree structure. The tree structure will not be visible unless the mechanism is editable. Each node (link, joint, frame, calibration and dependency) can be edited in its own dialog box, see below. Compile Mechanism Click this button to compile the mechanism. This button will not be visible unless the mechanism is editable and the mechanism model name is valid.
公司主營優勢
應用行業
