Juniper FEB-M10i-M7i-E-S-D網絡板
1.產 品 介 紹
品牌：Juniper
型號說明：Juniper FEB-M10i-M7i-E-S-D網絡板
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
Juniper FEB-M10i-M7i-E-S-DGCSR寄存器在VMEbus短I/O空間中訪問。每個通用寄存器有兩個字節寬，出現在偶數地址。通用寄存器編號0與GCSR寄存器的起始位置偏移$8（本地總線）或$4（VMEbus）。GCSR的本地總線基址為$FFF40100。GCSR的VMEbus基址取決于MVME162FX控制器的本地控制和狀態寄存器（LCSR）中編程的組選擇值和板選擇值。通過以下方式讀取GCSR通用寄存器來形成執行地址：GPCSR0用作地址GPCSR1的高位16位，GPCSR1用作地址診斷設施的低位16位。Juniper FEB-M10i-M7i-E-S-D要使用診斷，請將目錄切換到診斷目錄。如果您位于調試器目錄中，可以使用調試器命令“切換目錄（SD）”切換到診斷目錄。出現診斷提示（“162 Diag>”）。Juniper FEB-M10i-M7i-E-S-D
The GCSR registers are accessed in the VMEbus short I/O space. Each general purpose register is two bytes wide, occurring at an even address. The general purpose register number 0 is at an offset of $8 (local bus) or $4 (VMEbus) from the start of the GCSR registers. Juniper FEB-M10i-M7i-E-S-DThe local bus base address for the GCSR is $FFF40100. The VMEbus base address for the GCSR depends on the group select value and the board select value programmed in the Local Control and Status Registers (LCSR) of the MVME162FX controller. The execution address is formed by reading the GCSR general purpose registers in the following manner:GPCSR0 used as the upper 16 bits of the address GPCSR1 used as the lower 16 bits of the address Diagnostic Facilities The 162Bug package includes a set of hardware diagnostics for testing and troubleshooting the MVME162FX controller. To use the diagnostics, switch directories to the diagnostic directory. If you are in the debugger directory, you can switch to the diagnostic directory with the debugger command Switch Directories (SD). The diagnostic prompt ("162-Diag>") appears.Juniper FEB-M10i-M7i-E-S-D
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.wzljsf.com
