INDRAMAT CDB01.1-CS-ENS-NNN-NNN-L2-S-NN-FW驅動 控制器
1.產 品 資 料 介 紹：
中文資料：CDB01.1 -CS-ENS-NNN-NNN-L2-S-NN-FW 控制 部分是一個可配置模塊，是驅動 控制器的關鍵組件之一。這個Bosch Rexroth部件通常不單獨提供，而是安裝在制造商的驅動控制器內。在未完全放電之前，不應讓產品接觸裸露的導電部件。該設備應僅配備獲得制造商批準的備件和附件。僅當其應用符合國家 EMC 規定時，才允許配備該裝置的驅動控制器運行。
控制部分必須在電源關閉后僅半小時進行處理，以便其帶電電容器放電。 通電時不得觸摸其電氣連接點。除控制部分銘牌外，該產品還包含一個固件銘牌。此固件銘牌具有各種詳細信息，如類型、序列號、生產周、條形碼和工廠標識符。固件必須作為單獨的子項目購買。該裝置的最小 SERCOS 循環時間為 1,000μs。它具有 2kHz、4kHz 和 8kHz 的開關頻率。
本產品的電流控制周期時間為 125μs。標準控制面板具有四個按鈕和一個單行顯示屏，用于指示錯誤和命令診斷、運行狀態和未決警告。這個不可編程的面板應該在驅動 控制器打開之前插入，以便被識別。它有助于設置位置數據參考。繼電器觸點有 10 毫秒的釋放延遲和拾取延遲。它們還具有最小電流下 1,000 毫歐的接觸電阻。數字輸入分別支持 -3V 和 30V 的最小和最大輸入電壓額定值。
英文資料：
The CDB01.1 CS-ENS-NNNN-NNN-L2-S-NN-FW control section is a configurable module and one of the key components of the drive controller. This Bosch Rexroth component is usually not provided separately, but is installed in the manufacturer's drive controller. Before complete discharge, the product should not come into contact with exposed conductive parts. The equipment should only be equipped with spare parts and accessories approved by the manufacturer. The drive controller equipped with this device is only allowed to operate when its application complies with national EMC regulations.
The control part must be processed only half an hour after the power is turned off in order to discharge its live capacitor. Do not touch its electrical connection points when powered on. In addition to the control part nameplate, this product also includes a firmware nameplate. This firmware nameplate has various detailed information, such as type, serial number, production week, barcode, and factory identifier. Firmware must be purchased as a separate sub project. The minimum SERCOS cycle time of this device is 1000 μ s. It has switching frequencies of 2kHz, 4kHz, and 8kHz.
The current control cycle time of this product is 125 μ s. The standard control panel has four buttons and a single line display screen for indicating error and command diagnosis, running status, and pending warnings. This non programmable panel should be inserted before the driver controller is opened for recognition. It helps to set positional data references. The relay contacts have a release delay of 10 milliseconds and a pickup delay. They also have a contact resistance of 1000 milliohms at a minimum current. The digital input supports minimum and maximum input voltage ratings of -3V and 30V, respectively.
2.產 品 展 示
3.主 營 品 牌
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.wzljsf.com
