DELTATAU CLIPPERT3多軸運動控制器
1.產 品 資 料 介 紹：
中文資料：
DeltaTau ClipperT3是一款高性能的運動控制器，適用于各種工業應用。其主要配置和參數如下：
- 處理器：32位RISC處理器，最高頻率可達400MHz。
- 內存：128MB SDRAM，支持128MB~1GB的閃存存儲器。
- 通信接口：4個CAN接口、1個以太網接口、2個USB接口、2個RS232/422/485串口接口。
- 輸入/輸出：64個數字輸入/輸出通道，16個模擬輸入通道，16個模擬輸入通道。
- 支持的編碼器類型：增量編碼器、絕對編碼器、模擬編碼器等。
- 支撐的運動控制模式：位置、速度、加速度、力矩等。
- 支持的運動控制算法：PID、S曲線、S曲線PID、PVT等。
- 支撐的運動控制軸數：2~32軸。
DeltaTau ClipperT3的優點包：
- 高性能：處理器采用高性能的32位RISC處理器，內存比較大，支持高速數據處理和存儲。
- 多種通信接口：支持多種通信接口，包括CAN、以太網、USB、串口等，可滿足不同應用場景的需求。
- 強大的運動控制能力：支持多種運動控制模式和算法，可實現高度精細的運動控制。
- 高擴展性：支持多達32個軸的運動控制，可滿足大規格工業應用的需求。
- 可靠性高：該控制器的設計采用了工業級的硬件和軟件設計，可滿足復合工業應用的要求。
總的來說，DeltaTau ClipperT3是一款性能強大、功能豐富、擴展性高、可靠的運動控制器，適用于各種工業應用。
英文資料：
DeltaTau ClipperT3 is a high-performance motion controller that is suitable for various industrial applications. Its main configuration and parameters are as follows:
Processor: 32-bit RISC processor, with a maximum frequency of up to 400MHz.
Memory: 128MB SDRAM, supporting 128MB~1GB flash memory.
Communication interfaces: 4 CAN interfaces, 1 Ethernet interface, 2 USB interfaces, and 2 RS232/422/485 serial interfaces.
Input/Output: 64 digital input/output channels, 16 analog input channels, and 16 analog input channels.
Supported encoder types: incremental encoder, absolute encoder, analog encoder, etc.
The motion control mode of the support: position, speed, acceleration, torque, etc.
Supported motion control algorithms: PID, S-curve, S-curve PID, PVT, etc.
Number of motion control axes supported: 2-32 axes.
Advantages of DeltaTau ClipperT3 include:
High performance: The processor adopts a high-performance 32-bit RISC processor with relatively large memory, supporting high-speed data processing and storage.
Multiple communication interfaces: Support multiple communication interfaces, including CAN, Ethernet, USB, serial port, etc., to meet the needs of different application scenarios.
Powerful motion control capability: Supports multiple motion control modes and algorithms, enabling highly precise motion control.
High scalability: Supports motion control of up to 32 axes, meeting the needs of large-scale industrial applications.
High reliability: The design of this controller adopts industrial grade hardware and software design, which can meet the requirements of composite industrial applications.
In general, DeltaTau ClipperT3 is a motion controller with powerful performance, rich functions, high scalability and reliability, which is suitable for various industrial applications.
2.產 品 展 示
3.主 營 品 牌
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.wzljsf.com
