SAM ELETRONICS EMP2200控制器模塊
1.產 品 資 料 介 紹:
中文資料:
SAM ELETRONICS EMP2200注:如果既沒有啟用監督訪問也沒有啟用非特權訪問,則板將不會響應任何VMEbus訪問。
存儲器地址/訪問選擇開關(S8)開關S8用于配置SDRAM存儲器地址和訪問模式:?S8–選擇VMEbus地址A32至A26?S8-選擇VMEbus訪問模式
示例2:寄存器和內存選擇控制和狀態寄存器映射在擴展地址$3000000,SAM ELETRONICS EMP2200僅響應監控模式訪問。SDRAM反射存儲器映射在擴展地址$40000000,僅響應非特權模式訪問
注:SAM ELETRONICS EMP2200重要的是,兩個地址配置不能相互重疊或干擾系統中任何其他板的操作。
英文資料:
SAM ELETRONICS EMP2200NOTE: If neither Supervisory nor Nonprivileged access is enabled, the board will not respond to any VMEbus accesses.
Memory Address/Access Select Switch (S8) Switch S8 is used to configure the SDRAM Memory address and access mode: ? S8 – Selects VMEbus addresses A32 thru A26 ? S8 – Selects VMEbus access mode
Example 2: Register and Memory Select The Control and Status Registers are mapped at Extended Address $30000000 and responds to Supervisory mode access only. The SDRAM reflected memory is mapped at Extended Address $40000000 and responds to Nonprivileged mode access only
SAM ELETRONICS EMP2200NOTE: It is important that the two address configurations do not overlap each other or interfere with the operation of any other board in the system.SAM ELETRONICS EMP2200
2.產 品 展 示

3.主 營 品 牌

本篇文章出自瑞昌明盛自動化設備有限公司官網,轉載請附上此鏈接:http://www.wzljsf.com



